« previous next »
Pages: [1]   Go Down

Author Topic: Dug out some old vises  (Read 11820 times)

0 Members and 4 Guests are viewing this topic.

Offline Papaw

  • Owner/Administrator
  • Administrator
  • Hero Member
  • *****
  • Posts: 11221
  • Alvin, Texas
    • Papawswrench
Dug out some old vises
« on: May 13, 2011, 08:39:38 AM »
Looking for a project for later this Spring or Summer, I dug out these old vises.
Reed #105 with a repaired shaft
Parker 88 1/2
Unmarked post vise I got from my great uncle's old tools














Logged
Member of PHARTS - Perfect Handle Admiration, Restoration and Torturing Society
 
 Flickr page- https://www.flickr.com/photos/nhankamer/

Offline Nolatoolguy

  • Hero Member
  • *****
  • Posts: 2059
Re: Dug out some old vises
« Reply #1 on: May 13, 2011, 11:05:26 AM »
Wish I could just "dig out" tools. LOL

I dont know why but that post vise really jumps out at me.
Logged
And I'm proud to be an American,
where at least I know I'm free.
And I won't forget the men who died,
who gave that right to me.
~Lee Greenwood

Offline Papaw

  • Owner/Administrator
  • Administrator
  • Hero Member
  • *****
  • Posts: 11221
  • Alvin, Texas
    • Papawswrench
Re: Dug out some old vises
« Reply #2 on: May 13, 2011, 11:37:32 AM »
I have a few years head start on you, Neal!
Logged
Member of PHARTS - Perfect Handle Admiration, Restoration and Torturing Society
 
 Flickr page- https://www.flickr.com/photos/nhankamer/

lzenglish

  • Guest
Re: Dug out some old vises
« Reply #3 on: May 13, 2011, 12:51:55 PM »
Looks like you have some Great old stock to work with! I'm parcel to the old Post Vice Myself! Are you going to weld an ear mount on the first one shown yourself? I used a nickel rod on my Windmill case, along with pre-heating with a torch, and a whole bunch of hammer peining, and it worked out Great.

Good Luck,

Wayne
Logged

Offline Papaw

  • Owner/Administrator
  • Administrator
  • Hero Member
  • *****
  • Posts: 11221
  • Alvin, Texas
    • Papawswrench
Re: Dug out some old vises
« Reply #4 on: May 13, 2011, 01:00:54 PM »
I'm no great shakes at welding, and don't think the broken mount will ever bother me, so it will stay as is. I will try to redo the jaws. The big Parker needs more than I am willing or capable of doing to it. It will have its uses though.
Logged
Member of PHARTS - Perfect Handle Admiration, Restoration and Torturing Society
 
 Flickr page- https://www.flickr.com/photos/nhankamer/

Offline 64longstep/Brian

  • Contributor
  • Hero Member
  • *****
  • Posts: 484
  • Phoenix Arizona
Re: Dug out some old vises
« Reply #5 on: May 18, 2011, 12:43:58 PM »
I like the stile of the Parker...
Logged
If all else fails use a bigger hammer…
Member of PHARTS - Perfect Handle Admiration, Restoration and Torturing Society

Offline scottg

  • Hero Member
  • *****
  • Posts: 1748
    • Grandstaffworks Tools
Re: Dug out some old vises
« Reply #6 on: May 20, 2011, 08:31:02 PM »
Quote from: 64longstep on May 18, 2011, 12:43:58 PM
I like the stile of the Parker...

 Me three!!!
  That Parker is a machinist/tinsmith model!  Nice tall jaws with lots of clearance.
  Not really made to hammer a 1 1/2" diameter shaft with a 4 pound hammer on.
  But more precision work!
  Really really nice, and hard to find.
   yours Scott
Logged

Offline Bus

  • Contributor
  • Hero Member
  • *****
  • Posts: 734
    • The Wrenchingnews
Re: Dug out some old vises
« Reply #7 on: May 20, 2011, 11:11:35 PM »
Logged
Pages: [1]   Go Up
« previous next »