« previous next »
Pages: [1]   Go Down

Author Topic: Unknown Tool  (Read 3595 times)

0 Members and 1 Guest are viewing this topic.

Offline camzim

  • Newbie
  • *
  • Posts: 4
Unknown Tool
« on: January 25, 2013, 04:11:41 PM »
I acquired three of these several years ago, they were in a box of engravers and chip carver I purchased at a sale. Any idea what it is or how it's used. Looks like it would fit the socket of an anvil. Size; 6" long 3/8" at the short end 1/2" shoulder and tapers to 1/8"  hardened and has a manufactures mark. Direct  Link to photo as I'm having trouble with the attachment option.
 http://i1214.photobucket.com/albums/cc496/camzim/Public/unkown2.jpg
Logged

Offline Papaw

  • Owner/Administrator
  • Moderator
  • Hero Member
  • *****
  • Posts: 11221
  • Alvin, Texas
    • Papawswrench
Re: Unknown Tool
« Reply #1 on: January 25, 2013, 04:52:49 PM »
Find the IMAGE tag and then click the img icon just above the text box- 

Then paste the img tag between the brackets.
Logged
Member of PHARTS - Perfect Handle Admiration, Restoration and Torturing Society
 
 Flickr page- https://www.flickr.com/photos/nhankamer/

Offline john k

  • Contributor
  • Hero Member
  • ***
  • Posts: 2657
Re: Unknown Tool
« Reply #2 on: January 25, 2013, 07:08:49 PM »
I think it could fit into the hardy hole of an anvil, but tin smiths and silver smiths worked off of a steel plate set into a work table.   These had several holes for tools they could change out.   I have never seen a square tool bar such as this.   Tapered, so it could be for shaping, or straightening, you got me scratching my head. 
Logged
Member of PHARTS - Perfect Handle Admiration, Restoration and Torturing Society

Offline Branson

  • Hero Member
  • *****
  • Posts: 3643
Re: Unknown Tool
« Reply #3 on: January 26, 2013, 08:30:15 AM »
The smallest hardy hole I've seen is 1/2 inch.  Such a long, slender business end I can't see as surviving even the blows of a silver smith.  It looks to me like  the 3/8 end is meant to fit into a handle of some sort. 

If the edges were sharp, I'd call it a reamer... But they aren't. 

Can you get a magnification of the maker's mark?
Logged

Offline wvtools

  • Contributor
  • Hero Member
  • ***
  • Posts: 981
Re: Unknown Tool
« Reply #4 on: January 26, 2013, 09:12:15 AM »
Is the tip rounded or faceted?  It looks like a jeweler's broach to me, although I have not seen any that exact shape.  They were typically used in a jeweler's lathe to shape and enlargen holes.
Logged

Offline amertrac

  • Contributor
  • Hero Member
  • *****
  • Posts: 1880
  • ny mountain man
Re: Unknown Tool
« Reply #5 on: January 26, 2013, 10:00:11 AM »
Thats a ring guage for people with square fingers....... iWOULD SAY SOME SORT OF A MANDREL FOR SIZEING HOLES IN SOFT METALS 
Logged
TO SOON ULD UND TO LATE SCHMART

Offline oldtools

  • Hero Member
  • *****
  • Posts: 1424
  • Keep OldTools alive by giving them a purpose
Re: Unknown Tool
« Reply #6 on: January 27, 2013, 02:54:11 AM »
Maybe jeweler's tool to form square settings for inlays.
Logged
Aloha!  the OldTool guy
Master Monkey Wrench Scaler

Offline camzim

  • Newbie
  • *
  • Posts: 4
Re: Unknown Tool
« Reply #7 on: January 28, 2013, 05:30:34 PM »
I'd like to thank everyone for there help. Next thing I'll do is start searching appropriate catalogs. Unfortunately the makers mark is to small for a good photograph.
Logged

Offline wrenchguy

  • Hero Member
  • *****
  • Posts: 480
  • I like odd old stuff, especially mechanical.
    • Wrenchguys videos
Re: Unknown Tool
« Reply #8 on: January 28, 2013, 05:37:14 PM »
is the square/rectangle end anvil friendly?
Logged

Offline camzim

  • Newbie
  • *
  • Posts: 4
Re: Unknown Tool
« Reply #9 on: January 28, 2013, 05:41:53 PM »
Best closeup of makers mark I could get.
The square end has a slightly taper of about ten thousands.
Logged

Offline rusty

  • Hero Member
  • *****
  • Posts: 4345
Re: Unknown Tool
« Reply #10 on: January 28, 2013, 05:44:37 PM »
Something under an imperial crown....why am I thinking silversmith mark?
Logged
Just a weathered light rust/WD40 mix patina.
Pages: [1]   Go Up
« previous next »