Does anybody have a complete list of (red, clear, blue) Craftsman Screwdrivers?

[kdealkev]

Since no set from Sears has ALL of them. Some have been discontinued. Some are hard to find, and most seem to still be made in the USA. I was thinking of making a holder for mine that I could mount above my tool bench. But, I wanted it to be complete. Here is a list of what I have come up with. Hoping some of you guys have some input. Maybe some older ones, or ones I have missed. These are all the ones I could find with part numbers. Anyways, thought this was good information to share!

I come up with 10 Phillips, and 19 Slotted.

Slotted:
3/32 X 1 1/2 41541 (Small Clear)
1/8 X 2 41421 (Pocket Clip)
1/8 X 4 41589
3/16 X 1 1/2 41854 (Stubby)
3/16 X 4 41581
3/16 X 4 41247 (Cabinet)
3/16 X 6 41577
3/16 X 8 41248 (Cabinet)
3/16 X 9 41582
1/4 X 1 1/2 4151 (Stubby)
1/4 X 4 41583
1/4 X 6 41584
1/4 X 8 41578
1/4 X 12 41585 (Extra Long)
5/16 X 1 3/4 41586 (Stubby Shank, Long Handle)
5/16 X 6 41579
5/16 X 8 41587
3/8 X 8 41852
3/8 X 12 41588 (called this one Big Jim my whole life..)

Phillips
0 X 1 1/2 41542 (Small Clear)
0 X 2 1/2 41293
1 X 1 1/2 41855 (Stubby)
1 X 3 41294
2 X 1 1/2 4118 (Stubby)
2 X 4 41295
2 X 6 41853
2 X 8 41296
3 X 6 41297
4 X 8 41298


I have been unable to find any Clutch head screwdrivers. Of Course this list doesnt have the Torx, and all the other little variants I am still working on, like Scratch Awls etc.

Update: (9/16/2016) Here is a list of some of the Specialty Stuff...:

Robertson # 1 41141
Robertson # 2 41142
Scratch Awl 41028
Clutch Tip 41136 X 3/16

Torx:
T10 X 3 41473
T15 X 3 41474
T20 X 3 41475
T25 X 3 41476
T27 X 4 41479
T30 X 4 41477

Mini Torx: Black Shanks
T9 - 41134
T8 - 41133
T7 - 41132
T6 - 41131
T5 - 41130

Nut Drivers:

Standard (3/16, 1/4, 5/16, 11/32, 3/8, 7/16, and 1/2 in.)
Metric (5, 6, 7, 8, 9, 10, and 11 mm)

Stubby:
Need Sizes/Part Numbers

Reed Prince 4114 WF

Screw Holding Slotted:
41341
41281 (or 41231 cant tell)
41124
41123

Tack Puller (China, not sure if was a USA) 41397
Cotter Key Extractor 4319
41513 Hook & Pick Set (4 pc)
43372 Extension Handle 1/4" (Clear, then black, now black China)

Multi Bit:
Crown Reversible 41502 PD
Ratcheting 41466 WF
Magnetic W/ Cap 41467
6 in 1 41161 (Formerly USA now China)
4" Multi-bit - 43370
4" Multi-Bit w/ Storage Cap - 49099
41760?
Speed 41331

Slightly Older

3 X 10 3/4 41303

Craftsman Motorsports Edition (Checkered Flags) Solid Black & Black and Clear Handles
41583 Slotted 1/4"
41581 Slotted 3/16"
41589 Slotted
41542 Phillips Mini
41760 Slotted Mini
41474 T-15
41473 T-10
41475 T-20

Same Part number Sets:

41053 41192 (The Original, Clear and Red Handles)
41418 41416 WF, 41053 WF, 47100 PR (Red Solid Handles)
41784 Q PR Clear ((similar to main line) "Craftsman" Written in Red)
41555 WF, 41416 WF (Orange Solid Handles)

[amecks]

I have a scratch awl but the handle is blue lower and clear upper - no red. #41028 - USA.

[kdealkev]

Thanks, your scratch awl matches mine. Some don't have the red, I think only the Slotted and some others have the red.

[EVILDR235]

I still remember a line of screwdrivers that Sears sold that all models had the same part number. They seem to be the ones Sears always had on sale. They seem to be well made.

Mr.Robuck.

[kdealkev]

I remember those as well. They looked just like the ones I am talking about but were clear and red and were all flat on the end instead of the ball on the end. They all had the same part number. Oddly that part number was shared years later on with a set they made that was solid red but looked exactly (in shape) as the standard set of Craftsman screwdrivers.

[kdealkev]

Thanks, a lot guys. I am trying to keep up, as you can see the list keeps growing. Looks like for at least the slotted/phillips main line stuff. There are 29.