Indestro made wrench's

[m_fumich]

Which ones are Indestro Super?

[kxxr]

The 6 on the right, positioned almost vertical,  are Supers.

[fliffy42]

pretty sure I have a box of those kicking around. I will do some looking this weekend.

[m_fumich]

Kxxr, looking at these 5, one is a metric. The next to the metric has Indestro on one end and P720 on the other. Of the other 3, do they have anything on either end?

[kxxr]

Nothing on those three. And, there is one other that, like them, does not have "Indestro" on it.

[fliffy42]

Here are a few I came across so far.... more info/photo upon request

markings
top to bottom....
pic #1 DOES

1. 3/4x25/32 - 31 FORGED SELECT STEEL  &  7/8  MADE IN USA  25/32

2. 5/8X3/4 - 5/8 SELECT STEEL 3/4 (sizes on shaft) &  5/8  FORGED IN USA  3/4

3. 9/16X1/2 - 725B  DROP FORGED SELECT STEEL  & 9/16  MADE IN USA  1/2

4. 5/16X11/32 - 5/16 SELECT STEEL  11/16 (sizes on shaft) & 5/16 FORGED USA 11/16

Pic#2 DBE

1. 5/8X11/16 - 5/8 MADE IN USA 11/16 & 5/8 FORGED SELECT STEEL 11/16

2. 1/2X9/16 - 1/2 MADE IN USA 9/16 & 1/2 FORGED SELECT STEEL 9/16

3. 3/4X25/32 - 3/4 MADE IN USA 25/32  & FORGED SELECT STEEL

[kxxr]

I had these ol' things in another area and almost forgot about them:

[m_fumich]

Here are a few I came across so far.... more info/photo upon request

Cliff, can you tell me what all the markings are? I can't see them very well on my phone. What are the sizes and what's on each side?

[fliffy42]

Here are a few I came across so far.... more info/photo upon request

Cliff, can you tell me what all the markings are? I can't see them very well on my phone. What are the sizes and what's on each side?

Markings added to post

[kxxr]

These might be useful until you have your list in hand. They are from the RoseAntiqueTools.net site.

[m_fumich]

Cliff, pm sent about those wrench's.

Kxxr, I'll get with you late about your wrench's. The ones that only say Forged USA are the last ones I'm after. Indestro is first, then the Select Steel. Forged is last.

[m_fumich]

After accounting for The ones I have and what others have for me, here's a list of what I need.

Select Steel short DBE
13/16 - 7/8

Indestro deep offset DBE
3/8 - 7/16 #911
5/8 - 11/16 #913
15/16 - 1 #916
anything smaller than 3/8 or larger than 1"

Indestro Select deep offset DBE
anything smaller than 1/2 with the #911 or less
anything larger than 11/16 with the #914 or higher

Select Steel deep offset DBE
1/2 - 9/16 anything 13/16 and larger

Indestro Chicago DOE
anything except the 3/8 - 7/16 #723 or 3/4 - 7/8 #731A
gotta have the numbers on the head

Indestro Select Steel DOE
7/16 - 1/2 #P725 5/8 - 11/16 or larger
must have P7xx number on the head

Select Steel DOE
 7/16 - 1/2 #725
anything with the # larger than 725B except 5/8 - 3/4 #729

[m_fumich]

The list has been updated. It does not reflect the ones I'm getting from Cliff.

[FrankLee]

Here's what I've got available in Indestro.

[m_fumich]

Does that 5/16 - 3/8 DOE have the number 1721 on the head?