« previous next »
Pages: 1 [2]   Go Down

Author Topic: Trade for user tools needed for school  (Read 9297 times)

0 Members and 1 Guest are viewing this topic.

Offline JessEm

  • Hero Member
  • *****
  • Posts: 238
  • MinneSNOWta
Re: Trade for user tools needed for school
« Reply #15 on: August 17, 2013, 02:31:43 PM »
Quote from: Nolatoolguy on August 17, 2013, 08:08:55 AM
Quote from: JessEm on August 16, 2013, 07:27:23 PM
Quote from: mikeswrenches on August 16, 2013, 06:42:20 PM
JessEm, What size drill press vise are you looking for, and how soon do you need it?

I'm in no hurry, mikeswrenches... Not looking for a particular size. Just looking for SOMETHING to use on my drill press sometimes... If it articulated or turned, that would be nice... My ideal DPV would be an older Craftsman to match my drill press, but that's in a perfect world...

Notatoolguy, If it sounds like mikeswrenches and I can work out something for a drill press vice down the road, and you guys can work something out, I'm not opposed to just sending you the clamps ahead of time so you have them...

That would be great, if you two don't mind and I have something that mikes wrenches has it would work out great.

Sounds good. I got the impression from his previous post that you have something he is interested in.

mikeswrenches, please confirm that you have a drill press vise to send me, and let Nota know what you would like for it. ...If/when this is squared away I will send out the clamps. Thanks.

Also, I can probably scrounge up 2 more clamps if you need 10 total? Let me know. ... I will just go on record saying I would prefer not to get a Harbor Freight or similar drill press vise in return... I'm not being picky about what I get, but that's were I draw the line. :)
« Last Edit: August 18, 2013, 12:39:41 AM by JessEm »
Logged
Vintage Power Tools WANTED: Porter Cable 500 belt sander, beam saws (circular saws with 10"+ blades) including Mall Saw 120, Skil 127, Makita 5402A & 8190039, B&D, ETC...

Offline oldtools

  • Hero Member
  • *****
  • Posts: 1424
  • Keep OldTools alive by giving them a purpose
Re: Trade for user tools needed for school
« Reply #16 on: August 18, 2013, 02:13:02 AM »
Quote from: Nolatoolguy on August 17, 2013, 08:02:23 AM
Quote from: oldtools on August 17, 2013, 07:26:29 AM
What is a "teloscoping depth guage "??  The "telescoping gauge" or (Snap gage) is used for ID/bore readings not depth.. A Depth gage can be Dial indicator, digital, ruler, micrometer, pit, tire, etc. but I don't see any telocoping depth guage. check your list...

One of these below, as in the link.

 It sais it needs to measure depths up to 6" I have all the other machinest measuring tools needed but not this one.

http://www.starrett.com/metrology/metrology-products/precision-measuring-tools/hole-slot-gages/Telescoping-Gages#itemsPerPage=24&currentPage=1&displayMode=grid&sortBy=none/asc

OK, but note the link is for "/hole-slot-gages/" still can't figure using it for 6" depth readings. maybe 6" diameter.. but that is what the list calls for, so you need it..
see attached Depth gage for 6" depth...
Logged
Aloha!  the OldTool guy
Master Monkey Wrench Scaler

Offline HeelSpur

  • Hero Member
  • *****
  • Posts: 2033
  • Contributor
Re: Trade for user tools needed for school
« Reply #17 on: August 18, 2013, 05:26:46 PM »
Here is a couple items to ponder about our earlier chat.
The 6" pliers are Wizard brand, they are pretty tough.




http://www.datamp.org/patents/displayPatent.php?number=24465&typeCode=1
Logged
RooK E

Offline johnsironsanctuary

  • Contributor
  • Hero Member
  • ***
  • Posts: 1908
  • Super Contributor and Geezer in training
Re: Trade for user tools needed for school
« Reply #18 on: August 18, 2013, 05:41:31 PM »
I've got both hammers set out for you along with a couple of C Clamps. Do you need Pony style pipe clamps?
Logged
Top monkey of the monkey wrench clan

Offline OilyRascal

  • Contributor
  • Hero Member
  • *****
  • Posts: 2282
    • Facebook Profile
Re: Trade for user tools needed for school
« Reply #19 on: August 18, 2013, 07:46:31 PM »
Pliers are boxed, label printed, and ready for the mail tomorrow.
Logged
"FORGED IN THE USA" myself.  Be good to your tools!

Garden and Yard Rustfinder Extraordinaire!
http://www.papawswrench.com/vboard/index.php?topic=3717

Offline Nolatoolguy

  • Hero Member
  • *****
  • Posts: 2059
Re: Trade for user tools needed for school
« Reply #20 on: August 18, 2013, 08:12:08 PM »
Quote from: johnsironsanctuary on August 18, 2013, 05:41:31 PM
I've got both hammers set out for you along with a couple of C Clamps. Do you need Pony style pipe clamps?


Pony style pipe clamps are not needed, thank you thoe.

I will send you a pm shortly
Logged
And I'm proud to be an American,
where at least I know I'm free.
And I won't forget the men who died,
who gave that right to me.
~Lee Greenwood

Offline Nolatoolguy

  • Hero Member
  • *****
  • Posts: 2059
Re: Trade for user tools needed for school
« Reply #21 on: August 18, 2013, 08:12:33 PM »
Quote from: OilyRascal on August 18, 2013, 07:46:31 PM
Pliers are boxed, label printed, and ready for the mail tomorrow.

Thanks oily, I will send you a message shortly
Logged
And I'm proud to be an American,
where at least I know I'm free.
And I won't forget the men who died,
who gave that right to me.
~Lee Greenwood

Offline Nolatoolguy

  • Hero Member
  • *****
  • Posts: 2059
Re: Trade for user tools needed for school
« Reply #22 on: August 18, 2013, 08:23:06 PM »
Quote from: JessEm on August 17, 2013, 02:31:43 PM
Quote from: Nolatoolguy on August 17, 2013, 08:08:55 AM
Quote from: JessEm on August 16, 2013, 07:27:23 PM
Quote from: mikeswrenches on August 16, 2013, 06:42:20 PM
JessEm, What size drill press vise are you looking for, and how soon do you need it?

I'm in no hurry, mikeswrenches... Not looking for a particular size. Just looking for SOMETHING to use on my drill press sometimes... If it articulated or turned, that would be nice... My ideal DPV would be an older Craftsman to match my drill press, but that's in a perfect world...

Notatoolguy, If it sounds like mikeswrenches and I can work out something for a drill press vice down the road, and you guys can work something out, I'm not opposed to just sending you the clamps ahead of time so you have them...

That would be great, if you two don't mind and I have something that mikes wrenches has it would work out great.

Sounds good. I got the impression from his previous post that you have something he is interested in.

mikeswrenches, please confirm that you have a drill press vise to send me, and let Nota know what you would like for it. ...If/when this is squared away I will send out the clamps. Thanks.

Also, I can probably scrounge up 2 more clamps if you need 10 total? Let me know. ... I will just go on record saying I would prefer not to get a Harbor Freight or similar drill press vise in return... I'm not being picky about what I get, but that's were I draw the line. :)

I am going to send mikes wrenches a private message and see if we can work something out. If so I will let you know.
Logged
And I'm proud to be an American,
where at least I know I'm free.
And I won't forget the men who died,
who gave that right to me.
~Lee Greenwood

Offline RWalters

  • Sr. Member
  • ****
  • Posts: 136
Re: Trade for user tools needed for school
« Reply #23 on: August 18, 2013, 11:59:17 PM »
Neil,
I have a fillet gauge for you. It's by FibreMetal, measures 1/8 to 1 inch, concave and convex, with metric equivalents. If that will work, send me a pm with your address. Nothing in your trading stock I need right now, but keep me in mind if you bump into any small (1/2 shank or under) end mills or keyway cutters. Don't sweat it though, the gauge was a garage sale pickup and for what welding I do, I'd be better off with one that measured whether the weld was one turkey....uh..dropping or two, so you're welcome to it.
Logged

Offline JessEm

  • Hero Member
  • *****
  • Posts: 238
  • MinneSNOWta
Re: Trade for user tools needed for school
« Reply #24 on: August 26, 2013, 07:00:39 PM »
10 Vise Grips went out today, Monday. Thanks again mikeswrenches and Nolatoolguy.
Logged
Vintage Power Tools WANTED: Porter Cable 500 belt sander, beam saws (circular saws with 10"+ blades) including Mall Saw 120, Skil 127, Makita 5402A & 8190039, B&D, ETC...

Offline Ken W.

  • CONTRIBUTOR
  • Contributor
  • Hero Member
  • ***
  • Posts: 691
Re: Trade for user tools needed for school
« Reply #25 on: August 26, 2013, 10:12:34 PM »
If you go on the Peterson or Cooper website you can order the Vise Grip springs and screws for free.
Logged
Pages: 1 [2]   Go Up
« previous next »