Author Topic: Looks like a brass shotgun shell loading tool; if not, what is it"  (Read 3450 times)

0 Members and 1 Guest are viewing this topic.

Offline Wrenchmensch

  • Contributor
  • Hero Member
  • ***
  • Posts: 1114
  • Wrenches tell of man's freedom to think
Here is a set of nestling, handled tubes.  All the tubes are 3 5/8" long. The sizes inscribed on the tubes range from 15 up to 2.  Based on the 5/" size of the #12 tube, I guessed these tools may have been used to reload primers in reusable brass shotgun shell casings. If my conjecture is in error, please let me know ASAP.

Thanks guys!

Offline Mac53

  • Hero Member
  • *****
  • Posts: 203
Re: Looks like a brass shotgun shell loading tool; if not, what is it"
« Reply #1 on: April 14, 2012, 07:06:13 PM »
If I remember correctly, there was a set like this on here a while ago. Believe they are used to cut plugs in (cork, or rubber?) for tubes to go through...for vials and the such?
-Marcus-

Offline Papaw

  • Owner/Administrator
  • Administrator
  • Hero Member
  • *****
  • Posts: 11221
  • Alvin, Texas
    • Papawswrench
Re: Looks like a brass shotgun shell loading tool; if not, what is it"
« Reply #2 on: April 14, 2012, 07:22:07 PM »
That was it, Scottg identified it.
Member of PHARTS - Perfect Handle Admiration, Restoration and Torturing Society
 
 Flickr page- https://www.flickr.com/photos/nhankamer/

Offline scottg

  • Hero Member
  • *****
  • Posts: 1748
    • Grandstaffworks Tools
Re: Looks like a brass shotgun shell loading tool; if not, what is it"
« Reply #3 on: April 14, 2012, 09:28:00 PM »
Yeah well kinda
 A druggist's cork set for making up corks for bottles
  is what I heard.

 Select a larger cork and cut it down for your Turlington's Balsam, or whatever.
 Who could stock every size cork in the world? Much less brand new corks all the time.
 
   Unlike now, druggists didn't make all the money in the world once upon a time. Druggists were better thought of than doctors  (god forbid, I'd rather just to go the barber/surgeon!),
     but only barely.  Pretty slick and slippery on the whole,  druggists.
I tell ya,
  Man they better have a decent pickle barrel, and some good cigars in stock, you were going to go hang out in a drugstore!

 Some of them worked hard their whole lives and made the world a better place before they were done. Much better, some of them.
 But many just hawked the latest snake oil, by the bottle.   Or even worse.
 
   I happen to have a copy of the Druggist's Handy Book here. It tells how to make up many of the popular remedies and nostrums of the 1880's.
 Running short of Dalby's Carminitive?  No problem. Go to the dump and bring back some empty Dalby's bottles.  Rinse them out. 
 Now add this, and that, and stir and cook.
 Waa-laa here is your medicine!

 Anyway pick the size cork cutter closest to the bottle mouth, and run it down a bigger cork, and there is your stopper.
 That'll  be one dollar please.

 It all sounds good except ...............................
Nobody told me how you get the damn cork you just made out of the tube!!
 You have to pull the pin and unscrew the cap and push it though? 
 
 I guess
 yours Scott
« Last Edit: April 15, 2012, 10:09:32 AM by scottg »

Online Lewill2

  • Hero Member
  • *****
  • Posts: 1988
  • Bucks County PA
Re: Looks like a brass shotgun shell loading tool; if not, what is it"
« Reply #4 on: April 15, 2012, 07:24:48 AM »
Now you need a sharpener to go with them.

Offline mrchuck

  • Contributor
  • Hero Member
  • *****
  • Posts: 570
  • retired Federal LEO Ranger
Re: Looks like a brass shotgun shell loading tool; if not, what is it"
« Reply #5 on: April 15, 2012, 08:48:15 AM »
Surgical hemorrhoid removal tool.
Molon Labe

Offline Wrenchmensch

  • Contributor
  • Hero Member
  • ***
  • Posts: 1114
  • Wrenches tell of man's freedom to think
Re: Looks like a brass shotgun shell loading tool; if not, what is it"
« Reply #6 on: April 15, 2012, 02:00:24 PM »
Thanks, gentlemen, for all your informative responses.  I was able to confirm the cork cutter ID supplied by Scott G for this tool in my Dictionary of American Tools.  The rest of the responses dealing with druggists, relative esteem levels accorded druggists and doctors, and hemorrhoids, were superfluous, but then time hangs heavy on idle hands.

Offline Fins/413

  • Hero Member
  • *****
  • Posts: 432
Re: Looks like a brass shotgun shell loading tool; if not, what is it"
« Reply #7 on: April 15, 2012, 06:21:27 PM »
Its a standard set of cork/stopper borers. When people actually still did wet chemistry these could be used to bore holes in stoppers to insert tubes. I got one at work now. Here is a link that shows them.
 
http://www.krackeler.com/products/1081-Corks/21380-Cork-Borer-Sets.htm?highlight=cork+borses
 
 
 
« Last Edit: April 15, 2012, 06:26:52 PM by Fins/413 »
1959 Chrysler New Yorker
1982 E150 Ford van

Offline rusty

  • Hero Member
  • *****
  • Posts: 4345
Re: Looks like a brass shotgun shell loading tool; if not, what is it"
« Reply #8 on: April 15, 2012, 06:41:03 PM »

Eek!  $311 They don't give those away...
Just a weathered light rust/WD40 mix patina.

Offline Fins/413

  • Hero Member
  • *****
  • Posts: 432
Re: Looks like a brass shotgun shell loading tool; if not, what is it"
« Reply #9 on: April 15, 2012, 06:49:51 PM »
Anything from a scientific supply comapny these days is insane.
1959 Chrysler New Yorker
1982 E150 Ford van