« previous next »
Pages: [1]   Go Down

Author Topic: New What's-it  (Read 2079 times)

0 Members and 1 Guest are viewing this topic.

Offline Papaw

  • Owner/Administrator
  • Administrator
  • Hero Member
  • *****
  • Posts: 11221
  • Alvin, Texas
    • Papawswrench
New What's-it
« on: December 20, 2012, 09:06:27 PM »
A co-worker brought me this to ID. Found on an old farm.
Riveted two-piece tool that opens to 90 degrees, and closes square. Length of 5 3/4". One side has a 5/8" opening and the other has a tab 5/8" in length.
Looks like a crimper of some kind to me, but for large gauge. No hammer marks on it.
The tool has most of what looks like original japanning to me.
I find no numbers or maker marks on it anywhere.
Logged
Member of PHARTS - Perfect Handle Admiration, Restoration and Torturing Society
 
 Flickr page- https://www.flickr.com/photos/nhankamer/

Offline john k

  • Contributor
  • Hero Member
  • ***
  • Posts: 2657
Re: New What's-it
« Reply #1 on: December 20, 2012, 10:31:20 PM »
It looks like it could crimp the ferrule on power pole guy wires.  Sure is hefty.
Logged
Member of PHARTS - Perfect Handle Admiration, Restoration and Torturing Society

Offline HeelSpur

  • Hero Member
  • *****
  • Posts: 2033
  • Contributor
Re: New What's-it
« Reply #2 on: December 21, 2012, 04:56:54 AM »
It does have that look, maybe its suppose to be struck with a hammer cause it sure doesn't have a whole lot of handle for squeezing.
Logged
RooK E

Offline mikeswrenches

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 2002
Re: New What's-it
« Reply #3 on: December 21, 2012, 06:31:10 AM »
Maybe for battery terminal ends.  The lack of hammer marks could be because it never got used, or maybe they used a vise to close it rather than beating on it with a hammer.

Mike
Logged
Check out my ETSY store at: OldeTymeTools

Offline Papaw

  • Owner/Administrator
  • Administrator
  • Hero Member
  • *****
  • Posts: 11221
  • Alvin, Texas
    • Papawswrench
Re: New What's-it
« Reply #4 on: December 21, 2012, 07:08:39 AM »
Quote
Maybe for battery terminal ends.  The lack of hammer marks could be because it never got used, or maybe they used a vise to close it rather than beating on it with a hammer.
That was one of my first thoughts.
Logged
Member of PHARTS - Perfect Handle Admiration, Restoration and Torturing Society
 
 Flickr page- https://www.flickr.com/photos/nhankamer/

Offline Lostmind

  • Hero Member
  • *****
  • Posts: 1567
  • Wellington, Ohio 44090
Re: New What's-it
« Reply #5 on: December 21, 2012, 10:16:26 AM »
I'm with the battery terminal group. I used a similar tool in the 60's. We made up our own cables at the ignition shop I worked in.We used a vise to crimp them
Logged
Of all the things I've lost , I miss my mind the most
Pages: [1]   Go Up
« previous next »