« previous next »
Pages: [1]   Go Down

Author Topic: Kinda look like screw drivers, but...?  (Read 2051 times)

0 Members and 2 Guests are viewing this topic.

Offline Branson

  • Hero Member
  • *****
  • Posts: 3643
Kinda look like screw drivers, but...?
« on: July 17, 2012, 06:18:13 PM »
Somebody on another list asked what these were.   No response after a few days, so I thought I'd bring them to our panel of experts.
Logged

Offline john k

  • Contributor
  • Hero Member
  • ***
  • Posts: 2657
Re: Kinda look like screw drivers, but...?
« Reply #1 on: July 17, 2012, 06:36:13 PM »
Saw similar screwdrivers made for a gunsmith, or made himself, very precision tips with flat sides, but the one with the hole?   Those type handles go back some years, usually to the 19th century (turnscrews).
Logged
Member of PHARTS - Perfect Handle Admiration, Restoration and Torturing Society

Offline Lostmind

  • Hero Member
  • *****
  • Posts: 1567
  • Wellington, Ohio 44090
Re: Kinda look like screw drivers, but...?
« Reply #2 on: July 17, 2012, 09:07:33 PM »
Could the hole be to slide a rod in for more leverage?
Roy
Logged
Of all the things I've lost , I miss my mind the most

Offline Billman49

  • Hero Member
  • *****
  • Posts: 790
  • Collector of edged tools, especially billhooks...
    • A Load of Old Billhooks
Re: Kinda look like screw drivers, but...?
« Reply #3 on: July 18, 2012, 07:33:17 AM »
I'd say gunsmiths turnscrews - a Google images search finds many different types - but they all have one thing in common, designed to fit the screw slot tightly without slipping - you do not want burred screws, or scratches on the lock plates...
Logged

Offline Branson

  • Hero Member
  • *****
  • Posts: 3643
Re: Kinda look like screw drivers, but...?
« Reply #4 on: July 18, 2012, 08:34:13 AM »
Quote from: Billman49 on July 18, 2012, 07:33:17 AM
I'd say gunsmiths turnscrews - a Google images search finds many different types - but they all have one thing in common, designed to fit the screw slot tightly without slipping - you do not want burred screws, or scratches on the lock plates...

Looks close, as long as you google turnscrew instead of screwdriver.    The fellow wrote: "...couple of wood-handled hand tools that look
like woodworking chisels, but the shank on each ends with a square, narrowed tab. The shank on one of the tools widens out and is drilled
with an untapped hole about 3/8's in diameter. "

Need a clear picture of the tips of these, but they have some resemblance to the firing pin removal tool, which has a bar running through it.

http://www.bing.com/images/search?q=+gunsmiths+turnscrews&view=detail&id=B7BC3358722A5184A8A0A6C64F964A5D6B3D9D28
Logged
Pages: [1]   Go Up
« previous next »