Author Topic: Utica 527  (Read 5649 times)

0 Members and 1 Guest are viewing this topic.

Offline HeelSpur

  • Hero Member
  • *****
  • Posts: 2033
  • Contributor
Utica 527
« on: May 14, 2014, 02:35:37 PM »
Found these the other day and from I found out there are Aviation Cannon Plug Pliers.
Its the only pair I've seen so I had to snag them.


RooK E

Offline Lostmind

  • Hero Member
  • *****
  • Posts: 1567
  • Wellington, Ohio 44090
Re: Utica 527
« Reply #1 on: May 14, 2014, 02:48:49 PM »
looks like they would work on stubborn radiator hoses , or the 60s Ford fuel filters.
Of all the things I've lost , I miss my mind the most

Offline mvwcnews

  • Hero Member
  • *****
  • Posts: 962
Re: Utica 527
« Reply #2 on: May 14, 2014, 03:03:58 PM »
There is a similarly shaped UTICA No. 529 pliers with rubber faced smooth curved jaws -- they were intended for manipulating larger size vacuum tubes.  Anyone have a 1940s - 1950s vintage UTICA catalog to see what else could be out there?

Online Bill Houghton

  • Hero Member
  • *****
  • Posts: 2850
Re: Utica 527
« Reply #3 on: May 14, 2014, 03:34:01 PM »
Hey, cool!  Now you can maintain the cannons on your Hawker Siddeley Harrier, or F-104, or whatever plane you use to alert your neighbors that their dogs are barking too darned loud.

Offline rusty

  • Hero Member
  • *****
  • Posts: 4345
Re: Utica 527
« Reply #4 on: May 14, 2014, 04:04:58 PM »
Ahh... Lockheed F-104 Starfighter ....

Some fellow from NATO would like to know how many craters you would like in your parking lot...
Just a weathered light rust/WD40 mix patina.

Offline Chillylulu

  • CONTRIBUTOR
  • Hero Member
  • *****
  • Posts: 1533
Re: Utica 527
« Reply #5 on: May 15, 2014, 02:45:58 AM »
Cannon is a type of electrical connector. Think of an electrical cord end with 25 pins instead of 2 or 3.

With all those pins it can be real hard to plug in or unplug the connector, hence the specialty pliers.

Chilly

« Last Edit: May 15, 2014, 09:12:33 AM by Chillylulu »

Offline Bus

  • Contributor
  • Hero Member
  • *****
  • Posts: 734
    • The Wrenchingnews
Re: Utica 527
« Reply #6 on: May 15, 2014, 03:25:03 AM »
I found this Utica catalog at
https://archive.org/stream/UticaToolCatalog/uticatoolcatalog#page/n0/mode/1up

It lists both the 527 and 529 (with the nylon inserts).

It's catalog No. 661. Couldn't find a date but it has to be 1967 or after as that is the last date mentioned on the history page.




« Last Edit: May 15, 2014, 03:38:07 AM by Bus »

Offline Papaw

  • Owner/Administrator
  • Administrator
  • Hero Member
  • *****
  • Posts: 11221
  • Alvin, Texas
    • Papawswrench
Re: Utica 527
« Reply #7 on: May 15, 2014, 05:33:51 AM »
Great info, Bus!! Thanks!
Member of PHARTS - Perfect Handle Admiration, Restoration and Torturing Society
 
 Flickr page- https://www.flickr.com/photos/nhankamer/

Offline HeelSpur

  • Hero Member
  • *****
  • Posts: 2033
  • Contributor
Re: Utica 527
« Reply #8 on: May 15, 2014, 02:30:57 PM »
Dang, the kid in me wanted to play with a cannon.

That's a lot of great info. thanks guys.
RooK E

Offline amecks

  • Hero Member
  • *****
  • Posts: 1726
Re: Utica 527
« Reply #9 on: May 15, 2014, 02:51:17 PM »
Very good!  I have one of those in my toolbox but did not know the intended purpose.
Thanks!
Al.
Al
Jordan, NY

Offline Branson

  • Hero Member
  • *****
  • Posts: 3643
Re: Utica 527
« Reply #10 on: May 16, 2014, 07:00:09 AM »
Dang, the kid in me wanted to play with a cannon.

The kid may like playing with a cannon (my kid does too!), but the adult will fall for these pliers as well. 

I've had a pair for 15 or more years, and they earned a prominent place on my bench.  You know those
"safety" lids on cans of thinner, linseed oil, etc?  The ones kids get around easily enough but drive us
nuts getting them off?  Not any more.  These are the go to tool for getting those lids off!