Tool Talk

What's-It Forum => What's-It Forum => Topic started by: jabberwoki on February 16, 2013, 07:10:25 PM

Title: What is this?
Post by: jabberwoki on February 16, 2013, 07:10:25 PM

Wright 84470 and it`s magnetic?

Title: Re: What is this?
Post by: gibsontool on February 16, 2013, 08:24:37 PM

The left side top end looks like a (maybe) 1/4" drive, but it's hard to say, a few more pics might help.

Title: Re: What is this?
Post by: jabberwoki on February 16, 2013, 09:31:45 PM

Bump with more pics. The last photo shows the magnet.

Title: Re: What is this?
Post by: gibsontool on February 16, 2013, 10:13:24 PM

Now with the additional pics I'm totally baffled.

Title: Re: What is this?
Post by: jabberwoki on February 16, 2013, 10:56:57 PM

Could it be a tool magnetizer?

Title: Re: What is this?
Post by: rusty on February 17, 2013, 07:35:47 AM

The thing that is odd, and seems to make it something more than just an over designed pickup tool, or a magnitizer, is the 2 notches cut in the ends of the rods. Seems like it fits into something specific. Thinking assembly tool for putting something into something in a blind hole, where the magnet holds on to it until you get it in place...

The # is a little odd for Wright, so it could be a special for something...

Title: Re: What is this?
Post by: Fins/413 on February 17, 2013, 07:47:40 AM

I agree about the P/N I have a couple of older Wright catalogs and thay are all 4 digits.

Title: Re: What is this?
Post by: Papaw on February 17, 2013, 08:16:40 AM

WAG- Could it fit in a soldering iron? A big Weller type, maybe, the current making it an electromagnet?

Title: Re: What is this?
Post by: rusty on February 17, 2013, 08:23:37 AM

An interesting idea, not an electromagnet, soldering irons are AC, but a degausser for demagnitizing things...hmm

Title: Re: What is this?
Post by: amertrac on February 17, 2013, 10:24:37 AM

could it be a spanner wrench for working in a position so the fastener is in cavity.The magnet is so you don't loose the fastener down in the cavity maybe a magneto or generator

Title: Re: What is this?
Post by: jabberwoki on February 17, 2013, 06:12:36 PM

http://www.parttarget.com/5120-00-144-5881_5120001445881_84770.html/-F9ACF065-F0E6-4BDD-A4BA-F7B5B817CC8C
Thanks to knurled Nut from the gj.
It`s an aviation tool for Curtiss Wright.

Title: Re: What is this?
Post by: rusty on February 18, 2013, 05:25:08 PM

Too bad it is only indexed as a 'Magnetic Remover'

But you have a trail now....