Tool Talk

Picture Forum => Picture Forum => Topic started by: kxxr on February 14, 2013, 01:23:26 PM

Title: Some Stealth Photos from the Junque Shop
Post by: kxxr on February 14, 2013, 01:23:26 PM
Not very good photos,  but the shop keeper was kind of giving me the evil eye, so I snapped them quickly.
Adriance iron seat. That big knot in the front would leave you singing soprano for a day or two if you experienced sudden deceleration for any reason.
(http://i301.photobucket.com/albums/nn48/kxxr/tools/Adriance_zps42f8b04a.jpg)
Desmond Simplex No. 350
(http://i301.photobucket.com/albums/nn48/kxxr/tools/DesmandSimplex350_zps3006df80.jpg)
A fairly complete set of Wright 10 Point sockets. I don't recall which drive size but would guess 1/2. That thing next to it was labled a "walnut cracker".
(http://i301.photobucket.com/albums/nn48/kxxr/tools/wright10point_zpsdcb1f8e6.jpg)
I didn't see any markings on this one.
(http://i301.photobucket.com/albums/nn48/kxxr/tools/drill_zpsd2914967.jpg)
Winchester Plane
(http://i301.photobucket.com/albums/nn48/kxxr/tools/winchester_zpsda47dc88.jpg)
Title: Re: Some Stealth Photos from the Junque Shop
Post by: scottg on February 14, 2013, 02:22:40 PM
The Vise is a Littlestown. I had one exactly like it for years. It finally broke but I kept the hardy from it.
Not very common to see a hardy on any vise table!

 Did you take the sockets?
I'd have haggled, but wouldn't have left those!
  yours Scott   
Title: Re: Some Stealth Photos from the Junque Shop
Post by: mikeswrenches on February 14, 2013, 03:37:33 PM
I hate to sound dumb, but what were/are 10 pt. sockets used for?  What did he want for the drill?  I have a few but have never seen that one before.

Mike
Title: Re: Some Stealth Photos from the Junque Shop
Post by: rusty on February 14, 2013, 04:30:54 PM
>what were/are 10 pt. sockets used for?

You use them when you can't decide if you want to use 8 pt or 12 pt ;P
Title: Re: Some Stealth Photos from the Junque Shop
Post by: kxxr on February 14, 2013, 05:30:59 PM
The drill was not priced, but judging by the near by items, I'd guess $20 or so.
AA says the 10 point design is something Wright came up with in the late 50s to fit a square or a hex bolt of the same size. I did not buy them, but I did notice that he had come down to $22 from $40 last summer. I don't know, it's tempting.
So, Scott, would the vise say Littlestown on the other side? It caught my eye because the little hardy was still there after all it's been through. Could be a replacement I guess, but it looked original to my untrained eye. I cut off the price tag in the photo, but I think he had $45 on that.
Title: Re: Some Stealth Photos from the Junque Shop
Post by: mikeswrenches on February 14, 2013, 06:32:56 PM
>what were/are 10 pt. sockets used for?

You use them when you can't decide if you want to use 8 pt or 12 pt ;P

I'm a little slow today...I should have known that.

Mike
Title: Re: Some Stealth Photos from the Junque Shop
Post by: rusty on February 14, 2013, 06:46:03 PM

Sorry, I couldn't resist ;P

One of the sillier tool inventions of the 1950's....
Likely destroys square and hex head bolts equally well...

Still, tempting, they aren't exactly common.....
(I suspect mechanics weren't rushing out in droves to buy them)

Sadly I see very few Wright tools around here, so I never got that excited about collecting them...
Title: Re: Some Stealth Photos from the Junque Shop
Post by: scottg on February 14, 2013, 07:52:45 PM

So, Scott, would the vise say Littlestown on the other side? It caught my eye because the little hardy was still there after all it's been through.

 I have seen several brands on this same vise. Sears and others.
  If you ordered 12 dozen I am sure they'd put your name on instead!

    I am pretty sure its not a replacement hardy. I can't remember ever seeing any other vise with a hardy.
So even if it is a replacement, it still has to be the same one. :)
 yours Scott
Title: Re: Some Stealth Photos from the Junque Shop
Post by: john k on February 16, 2013, 11:28:28 PM
Nice pics.  On the sudden deceleration problem, since this was on a horse drawn farm implement, that would mean it went from 3mph to -0- in 10 feet or less.   I am thinking the drill possibly had (made in Germany) somewhere stamped. 
Title: Re: Some Stealth Photos from the Junque Shop
Post by: kxxr on February 17, 2013, 09:18:58 AM
Nice pics.  On the sudden deceleration problem, since this was on a horse drawn farm implement, that would mean it went from 3mph to -0- in 10 feet or less.   I am thinking the drill possibly had (made in Germany) somewhere stamped.

Good to know! I kept having this nightmare where a man in overalls is rolling around on the freshly plowed ground in agony, clutching his balls, while his unmanned tractor is riding off into the dusty sunset. Maybe that will stop now. :) Thank You!
Our revels now are ended. These our actors,
As I foretold you, were all spirits, and
Are melted into air, into thin air:
And like the baseless fabric of this vision,
The cloud-capp'd tow'rs, the gorgeous palaces,
The solemn temples, the great globe itself,
Yea, all which it inherit, shall dissolve,
And, like this insubstantial pageant faded,
Leave not a rack behind. We are such stuff
As dreams are made on; and our little life
Is rounded with a sleep.