Tool Talk

Picture Forum => 6 Inch & Under Club => Topic started by: J.A.F.E. on May 20, 2012, 09:38:22 PM

Title: About 4 and Under
Post by: J.A.F.E. on May 20, 2012, 09:38:22 PM
 



(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3628.jpg)

                             Armstrong  28-664                                                 BluePoint DA24
                             Barcolo Buffalo                                                       BluePoint
                             Barcolo Buffalo                                                       BluePoint
                             Black Hawk                                                            BluePoint AJ4

(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3629.jpg)

                                                         Challenger 4204
                                                         Companion 
                                                         Craftsman 
                                                         Craftsman 44601           

(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3630.jpg)

                             Crescent                                                          Crescent   
                             Crescent                                                          Crescent   
                             Crescent                                                          Crescent   
                             Crescent                                                          Crescent   
Title: Re: Adjustables
Post by: J.A.F.E. on May 21, 2012, 12:17:15 AM
(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3631.jpg)

                        Diamond (horseshoe logo)                                    Diamond (horseshoe logo) B/O finish
                        Diamond Diamalloy (horseshoe logo)                   
                        Diamond Diamalloy 5/16 12 point opening           
                        Diamond Diamalloy round hang hole                   

(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3632.jpg)

                             "Duro Chrome"                                                      Irega 77                 
                              Fleet 4204                                                            J.P. Danielson Betr-Grip
                             Indestro Super 3585A                                           Matco AJ4M
                             Irega 77                                                                McKaig-Hatch 204

(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3633.jpg)

                                                                 P&C
                                                                 P&C 1704     
                                                                 Pexto (my favorite of the bunch)   
                                                                 Power-Kraft 84-4701-40     
Title: Re: Adjustables
Post by: J.A.F.E. on May 24, 2012, 11:09:21 PM
(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3634.jpg)

                             Proto                                                                     Proto 704S Los Angeles
                             Proto Pro 704S                                                     
                             Proto 704                                                             
                             Proto Pro 704-S                                                     


(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3635.jpg)

                             Sparta A-304                                                Wards Master Quality
                             Truper (sent from a friend in  Mexico)           J H Willimas
                             Utica                                                             Wizard H4200
                             Utica Tools USA                                             

(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3637.jpg)

                 Unmarked 2 1/2 (from same friend in Mexico)          3" Bicycle -A- G&S inside a diamond                     

Title: Re: About 4 and Under
Post by: J.A.F.E. on June 02, 2012, 06:37:54 PM
(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3638.jpg)

                      Inside caliper 2 7/8 no name     Starrett No 4 square     Caliper  2 1/4 no name
                                                                        Starrett 2" rule
                                                             Champion Brass  1/2 micrometer
                      30° 60° 90° Triangle                                                       45° Triangle
Title: Re: About 4 and Under
Post by: J.A.F.E. on June 02, 2012, 06:41:58 PM
(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3639.jpg)

(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3640.jpg)

(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3641.jpg)

Sturtevant Richmond 1/4" drive 16 in/oz torque wrench
Title: Re: About 4 and Under
Post by: J.A.F.E. on June 02, 2012, 06:42:46 PM
(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3642.jpg)

3/4" Capacity vise
Title: Re: About 4 and Under
Post by: J.A.F.E. on June 02, 2012, 06:47:03 PM
(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3644.jpg)

                      Xcellite 3/32 nut driver                                       Unmarked 1/8
                      Xcellite P3 nut driver                                           Vaco 1/8
                      Craftsman (?)  1/8                                              Chuck Foley 3/32
                      Fuller 1/8                                                            Unmarked 1/8
                      Unmarked offset                                                 Wizard offset
Title: Re: About 4 and Under
Post by: J.A.F.E. on June 02, 2012, 06:49:35 PM
(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3650.jpg)

(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3651.jpg)

Snap-on 1/8 drive set 3/32, 1/8, 5/32, 3/16 sockets and Moody bit holder socket
Title: Re: About 4 and Under
Post by: J.A.F.E. on June 02, 2012, 06:51:15 PM
(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3652.jpg)

Vise Grip 4LR and 4 WR
Title: Re: About 4 and Under
Post by: J.A.F.E. on June 02, 2012, 06:53:55 PM
(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3645.jpg)

           Diamond HL14 (OEM for the two below)                        Snap-on 50C
                      Blue Point HL14                                                   Snap-on 105
                      Blue Point HL14
Title: Re: About 4 and Under
Post by: J.A.F.E. on June 02, 2012, 06:56:08 PM
(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3646.jpg)

                        Williams 1519                                       Champion De Arment (later ChannelLock)
                        Vlcheck FitzAll                                       ChannelLock
                        Craftsman
Title: Re: About 4 and Under
Post by: J.A.F.E. on June 02, 2012, 06:57:14 PM
(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3647.jpg)

                                   K-D No 8
                                   K-D No 7
Title: Re: About 4 and Under
Post by: J.A.F.E. on June 02, 2012, 06:58:37 PM
(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3649.jpg)

                          Snap-on 5CP
                          Snap-on 184 Vac Grip wire cutters
Title: Re: About 4 and Under
Post by: J.A.F.E. on June 02, 2012, 07:00:07 PM
(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3643.jpg)

                  Unmarked wood chisel 3/16 blade width
Title: Re: About 4 and Under
Post by: J.A.F.E. on June 05, 2012, 12:11:33 AM
New arrivals.

(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3658.jpg)

                                           Boker 5W-4
                                           NAPA Evercraft (even cheaper and sloppier standards than the Companion)
                                           Indestro Super 3585A

(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3659.jpg)

                                            Vacuum Grip No 105 Forged Streel Products Newport, PA

(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3660.jpg)
Title: Re: About 4 and Under
Post by: J.A.F.E. on June 13, 2012, 11:27:46 PM
(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3666.jpg)

                                             Snap on #5 Pliers 
Title: Re: About 4 and Under
Post by: J.A.F.E. on June 13, 2012, 11:30:54 PM
(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3675.jpg)

                                Craftsman 41130 T5
                                Craftsman 41542 Phillips 0
                                Craftsman 41061 Phillips 00
                                Craftsman 41541  3/32
                                Craftsman 41056 1/16
                                Craftsman 41058 3/32
Title: Re: About 4 and Under
Post by: J.A.F.E. on July 14, 2012, 11:41:29 PM
(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3699.jpg)

                 Snap on XS-67S  3/16 x 7/32                                Snap on XI-78      7/64 x 1/8
                 Snap on XS-67    3/16 x 7/32                                Snap on XI-1012  5/32 x 3/16
                 Snap on XS-810  1/4 x 5/16                                  Snap on XI-1415  7/32 x 15/64
                                                                                               Snap on XI-1618  1/4 x 9/32
                                                                                               Snap on XI-2022  5/16 x 11/32
 
(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3700.jpg)

                                                         Snap on OXI45B   1/8
                                                         Snap on OXIM4SB 4mm
                                                         Snap on OXI6        3/16
                                                         Snap on OXI6        3/16
                                                         Snap on OXI5        5/32
                                                         Snap on OXI7B      7/32
                                                         Snap on OXI8        1/4
                                                         Snap on OXI8        1/4

(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3701.jpg)

Teaser of 4" and under wrenches to come.
Title: Re: About 4 and Under
Post by: J.A.F.E. on July 21, 2012, 06:37:39 PM
Some recent arrivals.

(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3706.jpg)

                                                           OTC #DA-4

(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3707.jpg)

        Unmarked - these are about the nicest pliers I've seen and rival anything else in the collection
                                         Dunlap BT                                          Utica 517-5
                                         Indestro 3411                                    Wide
                                         Proto 235                                           Williams 1519

(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3708.jpg)

                                                            Unmarked pin spanner
Title: Re: About 4 and Under
Post by: J.A.F.E. on July 21, 2012, 07:40:16 PM
(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3704.jpg)

                                           Rolls Royce wrench for Silver Ghost and Phantom models
Title: Re: About 4 and Under
Post by: Plyerman on July 21, 2012, 09:30:44 PM
Quote from: J.A.F.E. on July 21, 2012, 07:40:16 PM
(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3704.jpg)

                                           Rolls Royce wrench for Silver Ghost and Phantom models


Now you'll need to get the car to go along with the wrench.


Title: Re: About 4 and Under
Post by: gibsontool on July 21, 2012, 09:48:41 PM
Great collection, thanks for sharing, those snap on dbe are awesome.
Title: Re: About 4 and Under
Post by: HeelSpur on July 22, 2012, 07:12:08 PM
This was in a old tool box I had bought, no markings what-so-ever.

(http://i1082.photobucket.com/albums/j368/wvabe/Errors/Braces/001-7.jpg)
Title: Re: About 4 and Under
Post by: oldtools on August 16, 2012, 01:07:30 AM
did you paint the tools or is it the lighting? filter lens.
Title: Re: About 4 and Under
Post by: Fins/413 on August 16, 2012, 05:05:52 AM
Holy cow cool stuff I'like to get into that wrench drawer.
Title: Re: About 4 and Under
Post by: J.A.F.E. on September 02, 2012, 10:04:48 PM
Quote from: Plyerman on July 21, 2012, 09:30:44 PM

Now you'll need to get the car to go along with the wrench.

If only. I believe either one of those cars is easily worth more than my house. In fact either would be worth more than everything I own.

Quote from: oldtools on August 16, 2012, 01:07:30 AM
did you paint the tools or is it the lighting? filter lens.

Just poor lighting and an inept camera operator.

Quote from: Fins/413 on August 16, 2012, 05:05:52 AM
Holy cow cool stuff I'like to get into that wrench drawer.

Thanks Fins. I average one or two just about every swap. Being small I have dig a round some but after a while you develop an eye for it. That and once a seller knows what you look for they often hold them for you or point you in the right direction.
Title: Re: About 4 and Under
Post by: J.A.F.E. on September 02, 2012, 10:38:25 PM
Some new arrivals.

(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3706.jpg)

                                                                         OTC

(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3739.jpg)

                                                                         Bonney!
                                                                         Williams
                                                              Unmarked German made

(http://i979.photobucket.com/albums/ae275/thejafe/4andunder/100_3724.jpg)

                                                                       Blue Point HL14
                                                                       Blue Point HL14
                                                                         ChannelLock
                                                                           Craftsman

Title: Re: About 4 and Under
Post by: DM11 on September 28, 2012, 12:35:43 PM
Nice collection!
Title: Re: About 4 and Under
Post by: Mel Larsen on October 10, 2012, 11:32:43 PM
Nice collection!  I think you should be a little more careful to keep your tools out of that darn "purple Rain"  ;o)
Mel
Title: Re: About 4 and Under
Post by: rusty on October 11, 2012, 06:40:10 PM

Very nice :)

I think I am in love with a torque wrench....