Tool Talk

Buying, Selling, and Trading => Buying, Selling, and Trading => Topic started by: Nolatoolguy on April 02, 2012, 05:27:25 PM

Title: Unmarked sockets
Post by: Nolatoolguy on April 02, 2012, 05:27:25 PM

I have some unmarked sockets I forgot I had in the shop. They all say made in the USA and have the same type of lines around them. They are the following sizes
-15/16
-7/8
-11/16
-5/8
-9/16
-7/16

Here are pictures, excuse the poor angles, there off the webcam.

(http://i822.photobucket.com/albums/zz141/nolatoolguy/snapshot-26.png)
(http://i822.photobucket.com/albums/zz141/nolatoolguy/snapshot-25.png)
(http://i822.photobucket.com/albums/zz141/nolatoolguy/snapshot-27.png)

I am going to ask 6 dollars for the sockets plus 6 dollars for USPS faltrate box shipping. The total will be a twelve dollars cash.

Title: Re: Unmarked sockets
Post by: m_fumich on April 16, 2012, 08:27:55 AM

Those are most likely Duro made socket's. Does anyone make a square to hex adapter with a check ball on the hex side?

Title: Re: Unmarked sockets
Post by: Nolatoolguy on April 17, 2012, 09:33:12 PM

Quote from: m_fumich on April 16, 2012, 08:27:55 AM

Those are most likely Duro made socket's. Does anyone make a square to hex adapter with a check ball on the hex side?

Thanks for the Info.

I am unsure if anyone makes that adaptor, however it wouldnt suprise me. I will do some checking to see if I can find one.

Title: Re: Unmarked sockets
Post by: eddie hudson on April 18, 2012, 05:54:33 AM

Quote from: Nolatoolguy on April 02, 2012, 05:27:25 PM

I have some unmarked sockets I forgot I had in the shop. They all say made in the USA and have the same type of lines around them. They are the following sizes
-15/16
-7/8
-11/16
-5/8
-9/16
-7/16

Here are pictures, excuse the poor angles, there off the webcam.

(http://i822.photobucket.com/albums/zz141/nolatoolguy/snapshot-26.png)
(http://i822.photobucket.com/albums/zz141/nolatoolguy/snapshot-25.png)
(http://i822.photobucket.com/albums/zz141/nolatoolguy/snapshot-27.png)

I am going to ask 6 dollars for the sockets plus 6 dollars for USPS faltrate box shipping. The total will be a twelve dollars cash.

For some reason I don't see the pictures, but if they say Made in USA with straight lines, then they are made by New Britain (Husky or None Better)

Title: Re: Unmarked sockets
Post by: m_fumich on April 25, 2012, 01:22:52 PM

What do you mean by "straight lines"?

Title: Re: Unmarked sockets
Post by: eddie hudson on April 25, 2012, 01:39:53 PM

Quote from: m_fumich on April 25, 2012, 01:22:52 PM

What do you mean by "straight lines"?

There are straight lines where the knurl should be. Old Indestro hex sockets do not say Made in USA while New Britain sockets do.
 
I still can't see any pictures, am I the only one?

Title: Re: Unmarked sockets
Post by: Papaw on April 26, 2012, 02:19:57 AM

I see them both in the OP and in your quote.

Title: PICTURES
Post by: lucakiki on April 26, 2012, 03:16:22 AM

So do I

Title: Re: Unmarked sockets
Post by: eddie hudson on April 26, 2012, 07:41:18 AM

Very strange, I see pictures in all the other posts but not in this one.
 

Title: Re: Unmarked sockets
Post by: Branson on April 26, 2012, 09:08:42 AM

Quote from: eddie hudson on April 25, 2012, 01:39:53 PM

There are straight lines where the knurl should be. Old Indestro hex sockets do not say Made in USA while New Britain sockets do.
 

So the knurled hex sockets that say Made in USA are New Britain?  Did I get that right?  I have a few of these.

Title: Re: Unmarked sockets
Post by: eddie hudson on April 26, 2012, 10:06:18 AM

I'm using my old PC with Windows XP, and I see the pictures. The sockets are New Britain (Husky or None Better).
 
Branson
The ones with straight verticle lines and Made in USA are New Britain. Please post a picture of yours, I think I know which ones they are but I'm not positive.

Title: Re: Unmarked sockets
Post by: crankshaftdan II on April 28, 2012, 04:34:07 PM

I have both types--this particular on looks to be cadimum plated with only the vertical-parallel lines so would presume this to be made by Duro/Indestero!

Title: Re: Unmarked sockets
Post by: eddie hudson on April 28, 2012, 04:41:25 PM

Quote from: crankshaftdan II on April 28, 2012, 04:34:07 PM

I have both types--this particular on looks to be cadimum plated with only the vertical-parallel lines so would presume this to be made by Duro/Indestero!

You are correct.