Tool Talk
General Category => General Discussion => Topic started by: amecks on April 08, 2021, 07:07:26 PM
-
Have a day off so took scrap metal in to recycler, got $29 (and left a $2 tip). The ReStore is not far away so the plan was to stop there. I only spent about a third of what I got for the scrap metal, so had enough to get cookies from Bella's Bakery. (Lou, have you tried them? They're on State Fair Blvd).
(https://i.postimg.cc/RZ7zSLxw/IMG-9714.jpg) (https://postimages.org/)
Across the top L to R - Unknown usage for Utica Pliers B672. K-D No. 161 feeler gauges. M. Klein & Sons No. 68702 hex wrench set 3/16 to 3/8. Piano wire cutter with no blades L.S. Starrett No. 1 - 5-1/2 IN. Sturdy bicycle wrench and spoke wrench.
Lower L to R - Xcelite nut driver hollow shaft 1/2. Three unknown tools; S-197 (like a miniature distibutor wrench), T-handle (aluminum on steel tool) small hex driver w/ hollow shaft) # 2980-50200, and S-421 slotted adjuster. Wrenches - Herbrand 5/8, Penens 1/2, Plomb pebble! 7/16, Hinsdale 1/4x3/8, S-K 1/4. The flat wrench with oblong holes is marked Crane Dial-ese (faucet install tool?).
(https://i.postimg.cc/d1SbHWGc/IMG-9715.jpg) (https://postimages.org/)
(https://i.postimg.cc/zfpZWDBB/IMG-9716.jpg) (https://postimages.org/)
(https://i.postimg.cc/NF9WW1x9/IMG-9717.jpg) (https://postimages.org/)
(https://i.postimg.cc/KzzX5Xk5/IMG-9718.jpg) (https://postimages.org/)
(https://i.postimg.cc/CxTgp6XF/IMG-9719.jpg) (https://postimages.org/)
(https://i.postimg.cc/yxMwBkff/IMG-9720.jpg) (https://postimages.org/)
(https://i.postimg.cc/25CNVLCM/IMG-9721.jpg) (https://postimages.org/)
(https://i.postimg.cc/MZnHWNPR/IMG-9722.jpg) (https://postimages.org/)
-
I like the raised lettering on the Hinsdale wrenches.