Tool Talk

Wrench Forum => Wrench Forum => Topic started by: lptools on April 15, 2020, 06:31:47 PM

Title: Crescent Adjustable Wrench Board
Post by: lptools on April 15, 2020, 06:31:47 PM

Hello, This needed a little work, missing & loose pins, missing L-hooks. The hardest thing to find were the correct size L-hooks, a couple were snapped off, I had to drill them out, fill the holes, and install the new hooks. The missing pins were made from round stock, and the new pins, and existing loose pins ,were epoxied in. I don't know for sure if the the hardware set-up is original, but I didn't want to change it. The group at top are all Crestoloy, and the group at bottom have Crescent Tool Co in raised letters. The Crestoloy lettering is on the back of the wrenches in the photo. Regards, Lou

Title: Re: Crescent Adjustable Wrench Board
Post by: mikeswrenches on April 15, 2020, 08:32:09 PM

Very nice Lou! Looks great!

Mike

Title: Re: Crescent Adjustable Wrench Board
Post by: EVILDR235 on April 15, 2020, 08:52:36 PM

Good job. 3 thumbs up.

EvilDr235

Title: Re: Crescent Adjustable Wrench Board
Post by: lptools on April 16, 2020, 06:36:29 AM

Hello, Guys , Thanks!!!!