Tool Talk

General Category => General Discussion => Topic started by: t115145 on April 14, 2017, 08:34:20 AM

Title: Plomb Question
Post by: t115145 on April 14, 2017, 08:34:20 AM

Did Plomb ever make an 11/32 combination "pebble" wrench?

Title: Re: Plomb Question
Post by: mikeswrenches on April 14, 2017, 10:07:32 AM

Take a look at the Tool Archives web site. Todd has posted a bunch of Plomb catalogs that you can download and then look through. I went through a couple of them and didn't see an 11/32.

Mike

Title: Re: Plomb Question
Post by: Northwoods on April 14, 2017, 11:30:33 AM

Sheesh!  I'd be happy to find one in 3/8.  I can find everything else, but no 3/8.

Title: Re: Plomb Question
Post by: t115145 on April 14, 2017, 05:32:36 PM

Northwoods,
Pretty sure I've seen 3/8ths on craigslist or Ebay.  It might have been with a junk-drawer clean out.

Title: Re: Plomb Question
Post by: Bad 31 on April 14, 2017, 06:46:36 PM

And I'm sitting here holding a 3/8" pebble that a friend just sent me from the west coast. Must be my lucky day.

Title: Re: Plomb Question
Post by: EVILDR235 on April 14, 2017, 08:56:40 PM

After I saw this post, I went and checked my hoard. I just sent one to a friend down South.

EvilDr235

Title: Re: Plomb Question
Post by: Northwoods on April 14, 2017, 10:18:13 PM

Grrrrrr....