Tool Talk
General Category => General Discussion => Topic started by: amecks on May 21, 2016, 02:34:36 PM
-
Lauver, I was poking around Garage Gazette and found you had a set of Sears 1/4" hex drive sockets and driver. My step-dad passed away two years ago and he had a set. Do you want the good news first or the bad news?
Good news: I have the socket tray! (Edit 5/22 ! - I have also found the hex key driver - looks like an allen wrench but has the retainer balls at both ends).
Bad news: I threw out the plastic pouch. (Sorry!)
Last year I found a metal handle hex shaft tool. It had a weird tool end but the handle was 1/4" hex and had a hollow knurled handle with a metal screw cap. So I took the shaft out of the Sears driver and pushed into the metal handle. Now I had a usable tool that would fit hex sockets. The only problem now was that I did not have a 3/8" socket - it was missing from the set.
(http://i136.photobucket.com/albums/q177/tamalecks/Tools/Hex%20drive%20tool%20001_zpsjvpsg5vn.jpg)
Please keep your eyes out for a 3/8" socket 1/4" hex drive. They are marked U.S.A.
PM your address and I'll send you the socket tray. I also have the two square sockets if you need them.
Regards
Al
(http://i136.photobucket.com/albums/q177/tamalecks/Tools/sears%20socket%20tray_01_zps9ipnwc69.jpg)