Tool Talk
Woodworking Forum => Woodworking Forum => Topic started by: Northwoods on March 22, 2016, 09:07:52 AM
-
Came home from an estate sale Sat. with a nice example of the Dikeman cabinet scraper. Pat Nov. 6, '06.
I am afraid it had been used as a paint scraper as well as a woodworking tool. It has an interesting cam action to hold the blade (which, sadly, is missing). I used paint remover on the steel, but left the maple? hickory? handle alone.
It is much more scarce than the Stanley #82. I will have to look to acquire a Stanley to display a!ongside it.
-
I'm not aware of that brand, can you post a picture of it?
-
I forgot to mention that it has infinite adjustments, as the handle loosens, allowing a ball and socket to swivel.
http://www-personal.umich.edu/~pfs/fun/Kiwanis/pix/dykeman.jpg
http://www-personal.umich.edu/~pfs/fun/Kiwanis/pix/dykeman_HSB.jpg
http://www-personal.umich.edu/~pfs/fun/Kiwanis/pix/dykeman_HS.jpg
http://www.papawswrench.com/vboard/index.php?topic=9125.msg89222#msg89222
http://www.ebay.com/sch/i.html?_odkw=vintage+speed+wrench&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xdikeman+cabinet+scraper.TRS0&_nkw=dikeman+cabinet+scraper&_sacat=0
-
That's an interesting design and probably works well. One feature on the Stanley version that I like is the handle or knob above the blade which may allow for better control on the down pressure. I say "may allow" because I've never used the Dikeman version but I have used my Stanley on a dresser top and I found it did a good job. Thanks for pics.
-
I agree completely about the knob. I am sure that Stanley had a wagonload of knobs on hand. Heavy gloves would be in order while using the Dikeman.
-
Starrett also made a scraper with the "ball and socket" adjustment. Theirs, however, had a wooden handle(think of a dowel with a longitudinal slot in it) that went on the top of the blade to make it easier on the hands.
Mike
-
My Dikeman now has a good blade. And my recycle bucket has one fewer junk handsaw blades....
It was a good half hour spent with a chisel, file, wire wheel, and several grits of sandpaper. Good as new!!
-
These scrapers are quite diverse in design. I've got an E.C. Stearns, with the same ball-and-socket angle adjustment, and a heavy cast iron head with an equally heavy cast iron cap, the two sandwiching the scraper blade. The shape gives a great, comfy hand hold on top, and the mass should absorb any chatter. I say "should" because I've been doing carpentry on the house since I got it, and the opportunity to use it on my work just hasn't been there.
-
Thanks for linking to my pix! --pfs
-
Hello, I have a few of these around here. From left to right ; H S B & Co. (Hibbard Spencer & Bartlett),missing blade, next is an E C Stearns Syracuse NY ( my hometown) , next is a Sargent, and on the far right is a Starrett , with the often missing top handle. Regards, Lou