Tool Talk

Woodworking Forum => Woodworking Forum => Topic started by: skipskip on September 14, 2011, 12:26:48 PM

Title: Stanley plane parts ID needed
Post by: skipskip on September 14, 2011, 12:26:48 PM

are these plane parts?

Stanley on one side

pat oct 11 01 on the other

to what?

thanks
Skip

(http://farm7.static.flickr.com/6208/6147235061_e3eef0cfc7_m.jpg) (http://www.flickr.com/photos/skipskip/6147235061/)
SEP 089 (http://www.flickr.com/photos/skipskip/6147235061/) by skipskip (http://www.flickr.com/people/skipskip/), on Flickr





(http://farm7.static.flickr.com/6159/6147783990_c133638a9f_m.jpg) (http://www.flickr.com/photos/skipskip/6147783990/)
SEP 090 (http://www.flickr.com/photos/skipskip/6147783990/) by skipskip (http://www.flickr.com/people/skipskip/), on Flickr

Title: Re: Stanley plane parts ID needed
Post by: jimwrench on September 14, 2011, 02:47:30 PM

 Looks like you have a depth stop for an auger bit. That patent should be 1904 not 1901 and model number is 49.

Title: Re: Stanley plane parts ID needed
Post by: skipskip on September 14, 2011, 09:04:09 PM

thanks!!

I see how it works now,

Skip

Title: Re: Stanley plane parts ID needed
Post by: Branson on September 15, 2011, 07:59:59 AM

Yep, depth stop.  There's more than one size for depth stops, to accommodate everything from the 3/16 to the largest of the double twist bits.

Title: Re: Stanley plane parts ID needed
Post by: stanley62 on September 16, 2011, 01:45:31 PM

Not the easiest critter to use...