Tool Talk

General Category => General Discussion => Topic started by: 1930 on December 24, 2014, 04:36:49 AM

Title: Hein Werner 63752
Post by: 1930 on December 24, 2014, 04:36:49 AM
Trying to re-build a leaking pump on this porta power, evidently the kit is no longer avail, there was a rubber seal/O-ring that has disintegrated within the pump and so I dont have much to go on in the way of finding a replacement.

Most local hydraulic cylinder centers have gone out of business, I was able to find a guy at a local place that with taking some measurements has assembled a kit for me that should work, no guarantees.

Problem: There is a 25 dollar minimum charge, its a total of maybe 5 small O-rings and chances are I will never need all the extras ( as extra kits ) he is throwing in just to make the amount of 25 justifiable.

Anyone here know where I can find an original parts list breakdown or anything else that might help me to be able to gather the required info so that I can go on-line and purchase the required O-rings at half the price.

Dont really need an extra porta power but I hate to just junk the thing. Thanks
Title: Re: Hein Werner 63752
Post by: skipskip on December 24, 2014, 10:11:07 AM
"Highball "  on garage journal is the hydraulic jack repair and parts guy.

if you don't visit GJ I can get an address for him.

Skip
Title: Re: Hein Werner 63752
Post by: mikeswrenches on December 24, 2014, 02:48:09 PM
If all you need are o-rings and seals, then Hydraulic Supply Co. At 7200 MLK Blvd. in Tampa should be able to fix you up.  They're just a few miles from you.

They have a counter and are used to working with oddball stuff.  As far as I know there is no minimum.

Mike
Title: Re: Hein Werner 63752
Post by: 1930 on December 24, 2014, 04:23:55 PM
If all you need are o-rings and seals, then Hydraulic Supply Co. At 7200 MLK Blvd. in Tampa should be able to fix you up.  They're just a few miles from you.

They have a counter and are used to working with oddball stuff.  As far as I know there is no minimum.

Mike
I do not think I have tried them yet, I will give it a shot and report back. Thanks
Title: Re: Hein Werner 63752
Post by: 1930 on December 24, 2014, 04:24:44 PM
"Highball "  on garage journal is the hydraulic jack repair and parts guy.

if you don't visit GJ I can get an address for him.

Skip
Thanks, Ill hit you up if the other place dosent come thru.
Title: Re: Hein Werner 63752
Post by: CRTDI on December 29, 2014, 01:00:56 AM
Found a parts list. Hopefully, this is helpful for you.

(http://i471.photobucket.com/albums/rr79/BENZSTER-1/HW63752_zps59dc7aca.jpeg) (http://s471.photobucket.com/user/BENZSTER-1/media/HW63752_zps59dc7aca.jpeg.html)
Title: Re: Hein Werner 63752
Post by: 1930 on December 29, 2014, 04:54:44 AM
Thanks very much, it already has been helpful.

I would have thought that entering part number and description would yield me the needed parts but I was wrong. Thanks though for your efforts.
Title: Re: Hein Werner 63752
Post by: CRTDI on December 29, 2014, 09:41:16 AM
You're welcome.

A couple of other parts sources:

Hiball's recommendation: Need a Seal Kit? Contact Hydraulic Parts Supply at 620-594-2247

or, you could also try:

http://www.hcrcnow.com/