Tool Talk

General Category => General Discussion => Topic started by: HeelSpur on April 24, 2014, 06:12:49 PM

Title: Odd hammer head
Post by: HeelSpur on April 24, 2014, 06:12:49 PM: I have an old bag of hammer heads and I pulled this one out today. I was rusted as can be so I wire-wheeled it. Doesn't have any markings on it but the handle opening and a slot between the claws has me curious as hell. I looked at the slot with a jewelers loupe and didn't see any teeth marks from a saw blade. Anyone seen one of these? Handle opening is 5/8".

(http://i1082.photobucket.com/albums/j368/wvabe/001-33.jpg)
(http://i1082.photobucket.com/albums/j368/wvabe/004-31.jpg)
(http://i1082.photobucket.com/albums/j368/wvabe/002-38.jpg)
(http://i1082.photobucket.com/albums/j368/wvabe/003-28.jpg)
Title: Re: Odd hammer head
Post by: rusty on April 24, 2014, 06:20:55 PM: They tried making hammers with the handle made from fiberglass rod for a while, didn't work well, the heads tended to fall off, even with the epoxy. One sometimes wonders if the old timers knew more than they were telling us ;P
Title: Re: Odd hammer head
Post by: skipskip on April 24, 2014, 07:29:04 PM: Piano tuners hammer?

would come in several different notes

Skip
Title: Re: Odd hammer head
Post by: mrchuck on April 24, 2014, 07:49:05 PM: Rusty is Right On,,,as usual.
Looks like a 32oz framing hammer head.
Title: Re: Odd hammer head
Post by: HeelSpur on April 24, 2014, 07:57:59 PM: How bout that slot, to me it looks like it was cut but in the 2nd pic you can see how squared off the end of the cut is.
Title: Re: Odd hammer head
Post by: scottg on April 24, 2014, 10:42:26 PM: Besides solid glass rods, they also made hammers with round steel tube handles, which also failed.
Plain glue in a round hole, just won't do to hold a hammer handle on, I don't care what kind of super schamntzy glue they think it is.
yours Scott
Title: Re: Odd hammer head
Post by: Chillylulu on April 25, 2014, 03:45:28 PM: Quote from: HeelSpur on April 24, 2014, 07:57:59 PM
How bout that slot, to me it looks like it was cut but in the 2nd pic you can see how squared off the end of the cut is.

To me it looks bandsaw cut.
Title: Re: Odd hammer head
Post by: Branson on April 27, 2014, 07:28:25 AM: Quote from: scottg on April 24, 2014, 10:42:26 PM
Besides solid glass rods, they also made hammers with round steel tube handles, which also failed.
Plain glue in a round hole, just won't do to hold a hammer handle on, I don't care what kind of super schamntzy glue they think it is.
yours Scott

Never liked these at all. But a high end German tool company, Picard, is currently making both.