Author Topic: Walden ratchet adapter  (Read 1496 times)

0 Members and 1 Guest are viewing this topic.

Offline coolford

  • Hero Member
  • *****
  • Posts: 865
  • Old as dirt
Walden ratchet adapter
« on: July 08, 2016, 01:14:09 PM »
I collect Walden tools, and in 20 years I have only seen 3 of these push-pull ratchet adapters, I have 2 of them.  Early ratchet you didn't have to flip to reverse.  Picked this on up off E-bay recently.  It is 1/2 inch drive.  I'm always interested in Walden and or Stevens/Walden.

Offline Northwoods

  • Hero Member
  • *****
  • Posts: 1901
Re: Walden ratchet adapter
« Reply #1 on: July 08, 2016, 03:26:57 PM »
I must be really dense, but I don't get it.
Your adapter plugs into a female ratchet.  Right?
What does the other part do, and how does it work?
The ORIGINAL Northwoods.

Offline coolford

  • Hero Member
  • *****
  • Posts: 865
  • Old as dirt
Re: Walden ratchet adapter
« Reply #2 on: July 08, 2016, 05:34:21 PM »
Right end plugs into a socket, left end plugs into a breaker bar (male) push down on the breaker bar and turn either direction (lift slightly, spring inside adapter lifts so adapter is disengaged so you can turn it back before pushing down to turn it again).  Present day ratchet adapters have a reversing lever.

Offline Northwoods

  • Hero Member
  • *****
  • Posts: 1901
Re: Walden ratchet adapter
« Reply #3 on: July 08, 2016, 06:23:14 PM »
Sheesh!
I was looking at this one from Snap-on on AA just two hours ago.  Very similar.


http://alloy-artifacts.org/Photos/tools/snapon_12dr_no6_cropped.jpg
The ORIGINAL Northwoods.

Offline Guido Salvage

  • Full Member
  • ***
  • Posts: 34
Re: Walden ratchet adapter
« Reply #4 on: July 09, 2016, 09:11:34 PM »
I have some Walden stuff here, what are you looking for?
"The practice of thrift begins with the purchase of quality"

Always looking for interesting and large displacement magnesium cased chain saws

"Order from a hoarder"