Here we go!
Mine says Blackhawk, and I think that is who made yours too.
Here is the bottom washer. See the spring? The knuckle is down in the hole.
The bent end of the spring (has a tiny leg at the end) goes through the bottom washer toward the outside.
See the other end of the spring? It is sticking up through the slot. Just loose at this point.
Now goes the second washer. See the tab on the washer? Tab sticking up?
This lines up across from the little spring which is now sticking up through the little hole in the4 second washer.
When its seated and everything looks just like this, use the tiny e-clip to secure it.
Now wiggle on the top selector.
Warning...........It won't want to go easy the first time you wiggle it on there. Keep wiggling until it sits down flush and flat.
Now, hold the mechanism by the drive plug. Hold it up vertical all assembled. Slip the ratchet body down over top of it, wiggling the mechanism inside.
When you get that down flush and lovely, add the anti friction washer (like a plastic washer) and set the retaining ring.
OK now here is the weirdest part. I swear its true.
Twist the selector and it will mess up. The ratchet will lock, or it will slip, or something bad, I guarantee it
won't work.
So now, you reverse the selector. Still won't work, don't get impatient.
Back and forth with the selector. Keep trying it.
It will do everything bad but finally it wiggles its silly butt "into the pocket" and the ratchet will turn soft as butter, and positive easy direction change.
It needs to wiggle itself into a very certain position, and maybe Blakhawk had an easier way to preset the thing?
But for me it takes some letting it re-set itself. Which it will.
Then it just works fine as frog hair.
yours Scott